Publicidad
Idiomas disponibles
Idiomas disponibles
E: Short pression: intensive speed for 7' (at the end
of this time, the system will return to the speed set
previously).
F:Press to set up the timer of 5 minutes. After 5
minutes the cooker hood will be switched off
automatically (motor and lighting). When the timer
is activated the LED flashes. The timer can not be
activated for intensive speed.
TOUCH CONTROL (Fig.2D)
A: Press to switch on/off the light.
B: Short pression: Motor ON at first speed. Long
pression: Motor OFF.
C: Short pression: Motor at second speed.
D: Short pression: Motor at third speed. Long
pression: intensive speed for 7' (at the end of this time,
the system will return to the speed set previously).
E: Press to set up the timer of 5 minutes. After
5 minutes the cooker hood will be switched off
automatically (motor and lighting). When the timer
is activated the LED flashes. The timer can not be
activated for intensive speed.
CLEAN AIR: to preserve air quality --> push Timer
button for 3'' with hood off. The hood turns on at first
speed for 10' per hour.
Push any button to disable the function.
FILTER SATURATION ALARM: light button LED flashes
every 30h of hood operation: the anti-grease filter
shall be cleaned. To reset the hood when it is off push
light button for 3'' . On/off button LED flashes every
120h of hood operation: the anti-odor filter shall be
replaced (filter version). To reset the hood when it is
off push light button for 3'' .
TOUCH CONTROL (Fig.3):
NOTE: with this command it is also possible to control
the appliance using a remote control, to be requested
as an accessory.
A Button = Switches the hood on/off. The equipment
switches on at the 1st speed.
B Button = Decreases motor speed.
C Display = Shows the selected motor speed and timer
activation/intense speed/filter warning.
D Button = Increases motor speed.
Pressing the 4th speed button engages the intense
function for 6 minutes, then the equipment goes back
to working at the speed at which it was activated. Du-
ring this function, the number 4 flashes on the display.
- If you wish to deactivate the function before the 6
minutes, press the B button.
Attention! Some models only work up to the 3rd
speed and, therefore, do not have the intense function.
E Button = Pressing this button activates the Timer
function even with any of the 1-2-3 speeds engaged
(except the Intense function speed). When the Timer
function is active, the set speed must flash on the
display when the timer is activated.
After 15 minutes, at the end of the countdown, the
hood switches off (motor and any lights if on).
If the intense speed is engaged, the Timer cannot be
activated.
- If you wish to deactivate the function before the 15
minutes, press the E button.
F Button = Switches the lights on/off.
• Anti-grease/active charcoal filters saturation:
- After 30 h of operation, when the C display flashes,
alternating the working speed with the letter F (i.e.
2 and F), this means that you need to wash the anti
grease filters.
- After 120 h of operation, when the C display flashes,
alternating the working speed with the letters C/F (i.e.
2 and C/F), this means that you need to wash or replace
the charcoal filters.
- Once you have repositioned the clean filter, you need
to reset the electronic memory with the hood on,
pressing the B button for about 3 seconds.
After that time, the letter E appears on the display
(reset confirmed) and the hood switches off.
MAINTENANCE
•Use only a damp doth with neutral liquid detergent.
•Do not use wet sponges or cloths, water jets,
thinners, solvents, hydrochloric acid, bleach, alcohol
or abrasive substances.
•Unplug the appliance or switch off the circuit breaker
before carrying out maintenance operations.
Lamp Replacement
•Only use lamps of the same type and Wattage instal-
led on the device.
LED Replacement (Fig.4)
•If the appliance version is with LED lamps, the
intervention of a specialised technician is necessary
to replace them.
Filters Replacement
•ACTIVATED CARBON FILTERS (Only filtering types)
(Fig. 5):
- The filter assembly can not be regenerated and
must be replaced at least every two months.
•METALLIC ANTI-GREASE FILTERS (Fig. 6):
- The filters must be washed at least one a month with
hot water and detergent.
- It can also be washed in the dishwasher.
- Open by means of the handle.
Tips for Energy Saving
•Always use the cover corresponding to each pot.
When cooking without a lid, the energy consumption
is somewhat greater.
•Use a glass lid to see inside without having to lift it.
•Use containers flatbed. If the base is not flat, the
energy consumption is greater.
•For small amounts, use small pans. A large bowl and
filled just needs a lot of energy.
•For cooking, use a little water. Thus, it saves energy
and preserves all the vitamins and minerals in
vegetables.
THE MANUFACTURER DECLINES ALL RESPONSIBI-
LITY FOR EVENTUAL DAMAGES CAUSED BY BREA-
CHING THE ABOVE WARNINGS.
ITALIANO
GENERALITÀ
Leggere attentamente il contenuto del presente libret-
to in quanto fornisce importanti indicazioni riguardanti
la sicurezza di installazione, d'uso e di manutenzione.
Conservare il libretto per ogni ulteriore consultazione.
L'apparecchio è stato progettato per uso in versione
aspirante (evacuazione aria all'esterno) e filtrante
(riciclo aria all'interno).
- 7 -
IT
Publicidad
