Publicidad
Idiomas disponibles
Idiomas disponibles
b. If reception is poor, connect the outside antenna.
Before attaching a 75 ohm coaxial lead (the
kind with a round wire going to an outsid
antenna), disconnect the supplied FM wire
antenna.
To avoid noise, keep antennas away from the
system, the connecting cord and the AC power
cord.
Connect to TV
You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
A. Using COMPONENT socket
- Connect a progressive scan TV through component
video for higher quality video.
- Connect component video cables(red/blue/ green-not
supplied) to:
• The VIDEO OUT (Y Pb/Cb Pr/Cr)sockets on this unit.
• The component video input sockets on the TV.
• The progressive scan video quality is only
available when a progressive scan TV is
connected.
• If you TV does not support progressive scan,
you cannot view the picture.
• For how to activate progressive scan on your
TV, refer to the TV user manual.
• The component video input jack on the TV
might be labeled as Y Pb Pr or YUV.
B. Using AV OUT socket
a. Connect audio cables (RED/WHITE) to:
- The AUDIO OUT R / L sockets on this unit.
- The audio input sockets on TV or the external
audio device.
b. Connect the composite video (YELLOW) cable to:
- The VIDEO socket on this unit.
- The video input socket on the TV.
C. Using SCART OUT socket
Connect the SCART cable to:
- The SCART OUT socket on this unit.
- The corresponding Scart input jacks on the TV.
33
Publicidad
