Mark MBAR 4 72 BAT Manual Del Usuario página 5

To connect more than one unit in a chain, please, follow this picture. The output of the first unit must
provide to the next DMX input of the signal, this way it is possible to send the signal to all the devices
in the chain.
ADVANCED USE
RECHARGEABLE BATTERY
The unit can operate with the internal battery after to be charged. The process is automatic while the
device is connected to an adequate AC plug. You can check the charge level through LED bar closed
the display.
CONTROL PANEL
MBAR 4 72 BAT can be configured in different ways thanks to its panel and selection buttons.
Press the MENU button (once or several times) until you get to the
desired function (according to the following chart), and press ENTER
to confirm your selection.
Use the UP & DOWN buttons to navigate between each function to
select the correct value. (Press ENTER to confirm the setting).
4