Mark MBAR 4 72 BAT Manual Del Usuario página 9

Colour Chase Table
No Function
000 – 007 No function
008 – 022 Colour chase 1
023 – 037 Colour chase 2
038 – 052 Colour chase 3
053 – 067 Colour chase 4
068 – 082 Colour chase 5
083 – 097 Colour chase 6
098 – 112 Colour chase 7
113 – 127 Colour chase 8
Color Chase
128 – 142 Colour chase 9
143 – 157 Colour chase 10
158 – 172 Colour chase 11
173 – 187 Colour chase 12
188 – 202 Colour chase 13
203 – 217 Colour chase 14
218 – 232 Colour chase 15
233 – 247 Colour chase 16
248 – 255 Sound active
CAUTIONS
Prevention of electric shock
The electrical connection must only be carried out by qualified personal. Before installing, make sure
you use the same power voltage marked in the MBAR 4 72 BAT (AC 100-240V/50-60Hz). Each device
must be properly grounded and installed in accordance with the relevant standards. Don't use the
device in a lightning storm or wet environment.
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Keep at last 0,5 m around the unit for ventilation purposes.
4. Do not place any object on the lens.
5. Do not replace with non-original spare parts. Contact your MARK dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation.
If you find any damage, please do not use the unit and contact the MARK dealer.
8