Publicidad
Idiomas disponibles
Idiomas disponibles
TRACK MODE OPERATION
START
Setting Target Torque
Current Torque Value
Reach 80% of Target Torque
Current Torque Value
...))...)) ((...((...
((...((...
Buzzer
((((((((
))))))))
Buzzer
Note:
1. If
is displayed, that means this wrench has applied
more than 110% of torque of the spec.
2. When 80% of the target torque is reached, the green LED will
begin to flash and the alarm tone will beep intermittently.
3. When the target torque is approached, the alarm will change to
a steady tone and the green LED will stop flashing and stay on.
The red LED will also illuminate.
(System initial)
*Note 1
Apply Torque
*Note 2
...)) ...))
Green LED
Reach 80% of Target Torque
Reach Target Torque
*Note 3
(((((((
)))))))
Red LED
Approached Target Torque
8
Publicidad
