Descargar Imprimir esta página

Lomography LomoApparat Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
FLASH FILTERS:
Your LomoApparat comes with a handy Filter Frame Slider [12] with three Filter Slots
[13]. There is one fixed grey ND filter and two empty slots. You may put the filters
of your choice into one of these empty Filter Slots [13] and store any spares in the
Spare Filter Holder [18] on the Back Door [2]. Use one filter per slot or get creative
and mix and match filters in the same slot to achieve exciting colored flash effects.
You can even create your own filters out of materials like sweet wrappers or clear
tape and colored pens. When you are shooting with the flash at a 0.5 m distance
from your subject or closer when using the Close-up Lens Attachment, use the grey
ND filter to ensure an even exposure.
UsING tHE LENs AttAcHMENts:
INSTALLING AND REMOVING LENS ATTACHMENTS:
1.
To use any of the Lens Attachments, simply hold your chosen Lens Attachment
by the sides and slide it over the Lens Hood [21] from top to bottom until it
clicks in place.
13 / English

Publicidad

loading

Productos relacionados para Lomography LomoApparat