Publicidad
Idiomas disponibles
Idiomas disponibles
TO LOAD YOUR FILM:
1.
Open the Back Door [2] by sliding the Back Door Lock [3] down.
2.
Place a 35 mm film into the Film Chamber [4].
3.
Pull the film leader across until it sits on the Take-up Spool [5], lining up with
the small yellow mark below it.
4.
Ensure the film sprockets align with the Sprocket Wheel [7] then close the
Back Door [2].
5.
Start to wind the Film Advancing Wheel [6] and pay attention to the Rewind
Lever [17]. If the Rewind Lever [17] turns at the same time then you know you
have loaded your film correctly. Keep winding the Film Advancing Wheel [6]
until it stops and you are ready to go! Struggling to load your film?
Head to
https://youtu.be/fzHp_E32Xs4
up and running in no time!
TAKING A PHOTO:
1.
To turn the camera on, slide the Shooting Mode Switch [8] to "N" and wait
until the Flash On/Off Button & Indicator [15] turns green.
2.
Make sure that the Film Advancing Wheel [6] can advance no further.
3.
Compose your image through the Viewfinder [9] and press the Shutter Button
for a quick video guide and you'll be
8 / English
Publicidad
