Lutron Home Works HR-REP-120 Manual De Instrucciones página 3

System Communications
RF Communications
RF Tabletop
Keypad
60 ft. (18 m) maximum
between RF
Processors and
Repeaters, or between
Repeaters
RF Communications Notes
• Hybrid Repeaters must be located within 30 feet (9 m) of the RF Dimmers/Switches and Keypads they are covering.
• Hybrid Repeaters must also be within 60 feet (18 m) of an RF Processor or another repeater.
• Multiple repeaters may be necessary to provide adequate coverage. Up to four (4) repeaters may be used with each
RF Processor, and up to five (5) Hybrid Repeaters may be used with each 8 Series
Processor (equipped with Hybrid Repeater Link).
Hybrid Repeater Link (Wired) Communications
HomeWorks P5 Processor
®
(8 Series shown)
30 ft. (9 m)
maximum
Hybrid Repeater Link
1000 ft. (305 m) maximum
wire length per run
Hybrid Repeater Link (Wired) Communications Notes
• Hybrid Repeater Link wiring must be in a daisy chain configuration.
• The total length of any single wire run on the Hybrid Repeater Link may be up to 1000 feet (305 m).
• The Hybrid Repeater Link (all wire runs) may contain up to five (5) Hybrid Repeaters total.
30 ft. (9 m) maximum
Hybrid Repeater
RF Dimmer
Sta * Sta
*
1 1 2 2 3 3 4 4
30 ft. (9 m) maximum
RF Keypad
(optional)
30 ft. (9 m)
maximum
60 ft. (18 m)
maximum
RF Keypad
RF Processor
Processor or 4 Series
TM
Hybrid Repeater
RF Keypad
30 ft. (9 m)
maximum
Hybrid Repeater Link
1000 ft. (305 m) maximum wire length per run
TM
RF Keypad
3