Forch 5331 2 2 Manual Original página 27

Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carry-
u
ing out any work on the power tool.
To ensure safe and efficient operation, al-
u
ways keep the power tool and the ventilation
slots clean.
In extreme conditions, always use a dust ex-
u
tractor if possible. Blow out ventilation slots
frequently and install a residual current
device (RCD) upstream. When machining
metals, conductive dust can settle inside the
power tool, which can affect its protective insula-
tion.
Store and handle the accessories carefully.
In order to avoid safety hazards, if the power sup-
ply cord needs to be replaced, this must be done
by Förch or by an after-sales service centre that is
authorised to repair Förch power tools.
Customer service
English
Theo Förch GmbH & Co. KG
PQS
Theo-Förch-Str. 11-15
74196 Neuenstadt
reparatur@foerch.de
+ 49 7139 95 0
Disposal
English
The power tool, accessories and packaging should
be recycled in an environmentally friendly manner.
Do not dispose of power tools along
with household waste.
Only for EU countries:
English
According to the European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment and
its implementation into national law, power tools
that are no longer usable must be collected separ-
ately and disposed of in an environmentally
friendly manner.
If disposed incorrectly, waste electrical and elec-
tronic equipment may have harmful effects on the
environment and human health, due to the poten-
tial presence of hazardous substances.
1 609 92A 7F0 • 17.11.22
Only for United Kingdom:
According to The Waste Electrical and Electronic
English
Equipment Regulations 2013 (SI 2013/3113) (as
amended), products that are no longer usable
English
must be collected separately and disposed of in an
environmentally friendly manner.
English
English | 27