Craftsman 316.794030 Manual De Instrucciones página 9

Securing the Throttle Cables
1. Wrap a zip tie around the elbow tube and the throttle cables (Fig. 5).
2. Carefully tighten the zip tie. Do not crimp the throttle cables.
Adjusting the Throttle Grip
1. Loosen the two (2) screws on the throttle grip (Fig. 6) with a T-20
Torx® screwdriver.
2. Move the throttle grip to a location on the upper blower tube
that provides the best grip (Fig. 6).
3. Tighten the two (2) screws on the throttle grip with a 1-20 Torx
screwdriver until the throttle grip is secure (Fig. 6).
Elbow Tube
Fig. 5
Zip Tie
Throttle Grip
Lower Blower Tube Upper Blower Tube
Screws
Fig. 6
9