Broan ALLURE QS3 Serie Manual Del Usuario página 5

ALLURE ® QS3 SERmES
RANGE HOOD
Page 5
CONNECT WIRING INSTALL HOOD
WARNING: To reduce the risk of electric shock,
make sure power is switched off at the service
panel. Lock or tag service panel to prevent power
from being switched on accidentally.
iiii!
HOUSE
WIRING
(120 VAC)
CARDBOARD
protect
cooktop)
Connect House Wiring (120 VAC) to hood. Use a piece of
Cardboard to protect the cooktop, if necessary.
GREEN
GROUND
SCREW
F_ Connect house black to hood black wire, house white to hood
white wire, and house ground under Green Ground Screw=
Securely tighten cable clamp onto house wiring=
rq
ra
KEYHOLE (4) MOUNTING SCREW(4)
Hang hood from (4) Mounting Screws. Slide hood towards
wall until mounting screws are engaged in narrow end of (4)
Keyholes. Tighten mounting screws securely. A long
screwdriver works best.
Replace bottom cover.
DUCT
TAPE
Connect ductwork to hood. Use Duct to make
Tap__ joints
secure and air tight.
PAR20
50W MAX.
HALOGEN
BULB (2)
-or-
R16,
40W MAX.
iNCANDESCENT
BULB (2)
Fq
install (2) PAR20, 50 W Maximum Halogen BuBbs or (2) R16,
40 W Maximum Incandescent Bulbs. Purchase bulbs
separately.
CAUTION: Bulbs may be hot! Refer to bulb packaging
for further information.
F_ Replace filters, turn on at sen,be panel, and test for
power
proper operation.