Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 10: ADD HYDRAULIC OIL
1.
The log splitter needs to be on a flat, level surface before adding the hydraulic oil.
2.
Remove the oil cap from the hydraulic oil tank.
3.
Add approximately 1.37 gallons of hydraulic oil, 10W AW, AW-32, ASLE H-150, ISO 32, Universal Hydraulic
Fluid or Dexron III Transmission Fluid.
4.
Check the hydraulic oil level.
5.
Start engine and use the control lever to extend and retract wedge several times to remove air from the lines.
6.
With the wedge retracted, check hydraulic oil level again and fill if necessary.
65
EN
Publicidad
