Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
4. To keep vibration and noise within minimum level when the dryer is in use,
it must be placed on a firm and level surface.
5. The feet must never be removed, and the appliance should not be placed
on a long-pile carpet, wooden slats or similar that may cause heat build-up
which could interfere with the operation of the appliance.
Level Adjusting
Once in its permanent operating position, check
that the dryer is absolutely level with the aid of a
spirit level. If it is not, adjust the feet by hand or
using a tool.
Power Supply Connection
1. Make sure that the voltage of the power supply is the same as the
electric specification.
2. Do not connect the dryer with the power connection board, a
universal plug or socket, do not use multi-plug adapters and
extension cables.
12
V.1
Publicidad
