Johnson JDRY8B1 Manual De Instrucciones página 50

MAINTENANCE
Cleaning and Care Empty
the water container
1. Pull out and hold the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into the basin.
3. Install the water container.
Warning!
！
• Empty the water container after each use. Once the water container is
filled completely, the programme will be paused and the "Ful" will light
on the display. After the container is emptied, the dryer can be restarted
by pressing Iniciar/Pausar button.
Do not drink the condensate water.
•
Do not use the dryer without the water container.
•
Clean the filters
This dryer has a primary door lint filter.
Make sure you clean the door filter after each cycle.
Note!
• To ensure the double-layer filter can
be closed smoothly , the arrows at
both ends need to be aligned, and the
middle slot and the rib need to be
aligned.
Clean the door filter
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on the
filter, You can clean it in running water.
4. Dry the door filter thoroughly before installing
it back.
Note!
• Take notice of the correct orientation before to insert the door filter.
22
Door Filter
V.1