Johnson JDRY8B1 Manual De Instrucciones página 54

MAINTENANCE
Problem
•Display is not
on
• "ful" is lighting
• • " " "is lighting
•Dryer does not
start
• Degree of dryness was
not reached or drying
time too long
•There are humming
noises
•The dryer switches off
at the end of the
programme
Warning!
！
If you cannot deal with the problems by yourself and need help:
• Press the On/Off button.
• Pull out the mains plug and call the service.
Solution
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the On/Off button.
• Check the water container. If it's full, please pour
out the condensate water and restart the dryer.
• If the container is not full, please restart the dryer
directly.
• If the "ful" icon is still lighting after you have
finished the first two steps, please call the service.
• Clean the lint filter.
Connect the tumble dryer to the mains.
•
•
Turn on the tumble dryer.
Check the the door is closed.
•
• Check the programme is set.
• Press the Iniciar/Pausar button.
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level
programme or time programme.
• The compressor is operating. These noises are
quite normal and do not indicate a fault.
• The dryer switches off automatically for
energy saving. This is not an error but a
normal function.
26
V.1