Bosch 0.601.9A1.300 Manual Original página 21

20 | English
Cordless Impact Screwdriver
Article number
with battery
Rated voltage
No-load speed
Impact rate
Maximum torque, hard
screwdriving application ac-
cording to ISO 5393
Bolt size
Tool holder
Weight according to
EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Assembly
Battery Charging
Use only the battery chargers listed on the
accessories page. Only these battery charg-
ers are matched to the lithium ion battery of
your power tool.
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, complete-
ly charge the battery in the battery charger be-
fore using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the
battery.
The lithium ion battery is protected against
deep discharging by the "Electronic Cell Protec-
tion (ECP)". When the battery is empty, the ma-
chine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Do not continue to press the
WARNING
On/Off switch after the ma-
chine has been automatically switched off. The
battery can be damaged.
2 609 140 816 | (26.10.10)
GDS 14,4 V-LI
Professional
3 601 JA1 T..
"premium"
V= 14.4
-1
min 0 –2800
-1
min 0 –3200
Nm 170
mm M6 – M16
½"
kg 1.6
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.
Removing the Battery
The battery 5 is equipped with two locking lev-
els that should prevent the battery from falling
out when pushing the battery unlocking button
6 unintentionally. As long as the battery is in-
serted in the power tool, it is held in position by
means of a spring.
To remove the battery 5, press the unlocking
button 6 and pull out the battery toward the
front. Do not exert any force.
3 601 JA1 T.. 3 601 JA1 S.. 3 601 JA1 S..
"compact" "premium"
14.4
0 –2800
0 –3200
170
M6 – M16 M6 – M16
½"
1.4
GDS 18 V-LI
Professional
"compact"
18
0 –2800 0 –2800
0 –3200 0 –3200
180
M6 – M16
½"
1.7
Bosch Power Tools
18
180
½"
1.5