Publicidad
Idiomas disponibles
Idiomas disponibles
General Power Tool Safety Warnings
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit unpredict-
able behaviour resulting in fire, explosion
or risk of injury.
f. Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265 °F may
cause explosion.
g. Follow all charging instructions and do
not charge the battery pack or tool out-
Cordless Screwdriver/Wrench Safety Warnings
1. Safety instructions for all
operations
a. Hold the power tool by insulated gripping
surfaces, when performing an operation
Cordless Drill/Driver Safety Warnings
1. Safety instructions for all
operations
a. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b. Use the auxiliary handle(s). Loss of con-
trol can cause personal injury.
c. Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasten-
ers may contact hidden wiring. Cutting
accessory or fasteners contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the opera-
tor an electric shock.
d. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand
or against your body leaves it unstable and
may lead to loss of control.
4
4
2610070415 GSR18V800FC 202310.indd 4
page heading
side the temperature range specified in
the instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6. Service
a. Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
b. Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or autho-
rized service providers.
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the pow-
er tool "live" and could give the operator
an electric shock.
e. Do not drill, fasten or break into existing
walls or other blind areas where electri-
cal wiring may exist. If this situation is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
f. Always wear safety goggles or eye pro-
tection when using this tool. Use a dust
mask or respirator for applications which
generate dust.
g. Use thick cushioned gloves and limit the
exposure time by taking frequent rest
periods. Vibration caused by hammer-drill
action may be harmful to your hands and
arms.
h. Secure the material being drilled. Never
hold it in your hand or across legs. Unsta-
ble support can cause the drill bit to bind
causing loss of control and injury.
i. Disconnect battery pack from tool be-
fore making any assembly, adjustments
or changing accessories. Such preventive
SAVE THESE INSTRUCTIONS
10/24/23 3:15 PM
Publicidad
