Kingfisher 5059340472027 Manual Del Usuario página 50

• Press again to switch off the appliance.
Stops by going into standby
(the fan stops 30 seconds after the stand-by).
Temperature control (only by remote control)
• Press to switch on the appliance.
• Press + or - to set the setting temperature from 10°C to 49°C (the light °C is on).
If room temperature 15°C, setting temperature 25°C, the display as the picture
• Press to cancel the temperature setting (the light °C is off) and to choose the
heating on half power ( ) or full power (
• The heater working on full power when the room temperature is 4°C lower than
the setting temperature.
• The heater working on half power when the room temperature is between 0° and
2°C lower than the setting temperature.
• The heater switches off when the room temperature is higher than the setting temperature. the fan
working 30 seconds to make inside cool to protect component, then fan stop, the unit enter into standby.
• The heater switches on again when the room temperature falls 2°C below the setting temperature.
TIMER TURN-ON, TIMER TURN-OFF (by control panel and remote control)
Timer turn-on in stand-by mode:
• Press to set the appointment turn-on time in 1-12 hours (the light
• The display automatically decreases 1 hour for each hour passed. When the appointment power-on time
arrived, the product will automatically turns on. The default setting temperature is 23°C.
• If not setting the setting temperature and weekly program, the unit will automatically turn-off after 12h
continuous-by.
• For example to set appointment turn-on time to 8 hours
Timer turn-off in running mode:
Press to set the appointment turn-off time in 1-12 hours (the light
When the appointment power-off time arrived, the product will automatically turns off. The default setting
temperature is 23°C.
For example to set appointment turn-off time to 8 hours.
5059340472027_MNL_IN_V03.indb 49 5059340472027_MNL_IN_V03.indb 49
).
is on).
49
is on).
6/9/22 11:19 AM 6/9/22 11:19 AM