Descargar Imprimir esta página

Kingfisher 5059340472027 Manual Del Usuario página 52

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72
Press P to active the weekly program (the light P is on), or to disable it (the light P is off).
After the above setting are completed and P program is work, press DAY/EDIT TIME/ON and TIME/OFF
to check the setting time of each day and time period.
When the turn-on time is same as the turn-off time, the appliance is in stand by mode.
If the setting temperature is not set, the default setting temperature is 23°C. If room temperature higher
23°C, the appliance is not switch on.
The weekly program is erased when the switch is off.
For example: Setting Monday 1st period working time 7:00 to 13:00.
Press P
Set open window (only by remote control)
Press
to switch on the appliance, heating for a moment until
stability.
Press
to active the open window mode (the light
Press + or - to set the setting temperature for the open windows
function.
Press
to disable the open window mode (the light
The appliance will resume to previous working mode.
During open window mode, if the room temperature drops from about 5°C to 10°C in less than 10 minutes,
the appliance will stop working and enter into stand by mode. Press
If open-window mode and weekly timer program simultaneously, if the appliance turn off in weekly time,
the appliance is not turned on. If it already turn on in weekly timer, the appliance working as the setting
temperature under open-window mode.
Note: Before turn on weekly program: it must set working day and time period(P1-P6) , otherwise the weekly
default state is "00", the product does not work.
02 Remote control
The remote control requires 1 CR2025 3V lithium battery (not included)
Important: Follow the instructions of use and the recycle rules given on the battery
packaging.
1. Open the battery compartment by sliding the cover down.
2. Insert the battery into the compartgram (see below drawing).
3. Close the battery compartment.
The remote controller control can be normally used within 3 meters in front of the
product and in the left and right angles of 60 degrees.
5059340472027_MNL_IN_V03.indb 51
5059340472027_MNL_IN_V03.indb 51
Day
EDIT
CR2025
SN
Time/On
is on).
is off).
again to switch on the appliance.
OPEN
PUSH
51
Time/Off
OK
6/9/22 11:19 AM
6/9/22 11:19 AM

Publicidad

loading

Este manual también es adecuado para:

5059340472041505934047207250593404720585059340472065