Matikgate SPIDER S40 Manual Del Usuario página 32

EN
• Read the manual carefully, if in doubt, contact MATIKGATE AUTOMATION assistance.
• This manual contains instructions and safety warnings. Incorrect installation of the automation can cause
serious injuries.
• Keep this instruction manual for reference at for future maintenance work.
• MATIKGATE AUTOMATION is not responsible for the incorrect use of the product, or for use other than
that for which it was designed.
• MATIKGATE AUTOMATION is not responsible if the safety standards were not complied with in the
installation of the equipment to be automated, nor for any deformation that may occur to it.
• This product was designed and produced strictly for the use indicated in this manual. Any use other than
that indicated may damage the product and/or cause physical and material damage.
• Do not make changes to engine components and accessories.
• Do not keep the product close to heat sources or open flames, which could damage it, corrupt it or create
dangerous situations.
• Keep transmitters out of the reach of children to avoid accidents.
• The user must not, under any circumstances, try to repair or adjust the automation, he must call a qualified
technician.
• The installer must inform the customer of how to handle the product in an emergency and provide its
manual.
• The installer, before carrying out the assembly, must verify that the temperature range indicated on the
automation is suitable for the location of the installation.
• The installer, before carrying out the assembly, must check that the equipment to be automated is in
good mechanical condition, correctly balanced and opens and closes properly.
• This automatism is strictly for internal use.
• Preventive maintenance should be carried out every 6 months.
32
MATIKGATE AUTOMATION
SAFETY WARNINGS