Matikgate SPIDER S40 Manual Del Usuario página 41

ERROR code
ERR01
High current.
ERR03
Under voltage.
ERR04 About voltage.
ERR05 About voltage.
ERR06
Blocked rotor.
ERR07
Outside programmed limits.
ERR08 Failed EEPROM.
ERR09 High speed.
ERR10 Motor in reverse.
ERR11
Overload.
ERR12 Current failure.
ERR13 Encoder failure.
ERR14 Fault in initial rotor angle.
ERR15
Communication failure.
ERR18 Brake circuit failure.
ERR19 Absolute encoder fault.
ERR20 Work time exceeded.
ERR21
Safety 1 exceeded during route.
ERR22 Safety 2 exceeded during route.
ERR23 No programmed limits.
ERR24 24V fault.
ERR26
End of course failure.
ERR27
Overheating.
ERR28 Electromagnetic brake failure.
ERR29 Absolute Encoder.
ERR30
No function in this version.
ERR31
Encoder 2 failure.
ERR32 Encoder 3 failure.
ERR33 Absolute encoder failure 2.
ERR34
Absolute encoder reset.
ERR35
Absolute encoder reset 2.
ERR36 Distance between boundaries too short.
ERR38 Electromagnetic brake failure 2.
ERR39
Encoder 4 failure.
ERR40
Encoder 5 failure.
ERR41 Unstable encoder position.
ERR42 Wrong motor direction.
ERR43
Distance between boundaries too short.
ERR44
Distance between boundaries too large.
ERR45 Wrong encoder direction.
ERR47 Encoder limits do not match.
ERR48
Abnormal port position.
ERR49
Programmed limits failed.
ERR50 Motor too hot.
ERR51 Central too hot.
ERR53 Electromagnetic brake failure 3.
ERR54
No function in this version.
ERROR TABLE
Description
EN
41
MATIKGATE AUTOMATION