Matikgate SPIDER S40 Manual Del Usuario página 38

EN
Press the "SET" button 1 time, change the password to "6668" using the "+" key, then confirm with "OK".
Scroll through the menus to the desired option. Depending on the parameter, use the "ADJ", +/- or OPEN/
CLOSE keys to change to the desired value. Save to "SAVE". Exit with the "ESQ" key to the main screen.
Index Parameter
1 Opening Speed
2 Closing Speed
3 Open Slowdown dis
4 Close Slowdown dis
5 Auto Closing Time
6 Output 1 Config
7 Output 2 Config
8 Safe Signal Height
9 Display Config
10 Backlight setting
11 Auto Anti Frozen
12 Wireless remote
13 Safety Edge Set
38
MATIKGATE AUTOMATION
PROGRAM / CHANGE PARAMETERS
20-150
20-150
30-500
30-500
- Disable
- 1-240 s
- Non-close limit
- Closed limit
- Non-open limit
- Open limit
- Opening
- Closing
- Non-limit position
- Limit position
- Reach close limit
- Fault warning
- Disable
- Double interlock aut. opening
- Running
- Stopped
- E-stop state
- Auto closing countdown
- Delayed opening countdown
- Safety signal
- Normal state output
Set the current position of the door to the failure height of
safety signal
- Position
- Speed
- Torque
- 3 minute auto Off
- Signal Wake_up
- 60 minute power saving
- 60 minute auto off
- Always on
- Off
- 1-999 min
- Off
- On
- Unused
- Open cmd
- Stop cmd
Value Predefined
80
70
50
50
0
Disable
Disable
Torque
Signal
Wake_up
Off
Off
Off