Descargar Imprimir esta página

Indel B TB65 DD STEEL Manual De Instrucciones página 31

Ocultar thumbs Ver también para TB65 DD STEEL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
TEMPERATURE ADJUSTMENT
The temperature can be set independently for each zone in a range between -18°C and 10°C.
REGULATING THE LEFT-HAND ZONE
- Press the SET button once and the temperature of the left-hand zone area will start flashing on the display with the currently
set value;
- While the temperature is flashing, press the UP button to increase the temperature or the DOWN button to decrease it;
- Once the temperature is selected, wait 3-5 seconds for the temperature to stop flashing. The display will once more show
the current temperature inside the left-hand zone.
ADJUSTING THE RIGHT-HAND ZONE
- Press the SET button twice and the temperature of the right-hand zone area will start flashing on the display with the
currently set value;
- While the temperature is flashing, press the UP button to increase the temperature or the DOWN button to decrease it;
- Once the temperature is selected, wait 3-5 seconds for the temperature to stop flashing. The display will once more show
the current temperature inside the right-hand zone.
SWITCHING OFF A ZONE
Either of the two zones can be switched off independently from the other.
It is advisable to switch off a zone if it is empty. This will maximise the refrigerator's cooling efficiency for the other zone.
Switching off the left-hand zone:
- Press and hold the UP button until the temperature of the switched-off zone is switched off on the display;
- If the left-hand zone is switched off, press and hold the UP button to switch it on again.
Switching off the right-hand zone:
- Press and hold the DOWN button until the temperature of the switched-off zone is switched off on the display;
- If the right-hand zone is off, press and hold the DOWN button to switch it on again.
CHANGE THE DISPLAY FROM °C TO °F
To change the display from °C to °F (or vice versa), press the SET button 5 times. Press the "UP" and "DOWN" buttons while
the unit of measurement is flashing to pass from one to the other.
29
OFF IS A BRAND OF INDELB
EN

Publicidad

loading

Este manual también es adecuado para:

Tb92 dd steelTb118 dd steel