Fein ASAS18-21KAS Manual Del Usuario página 14

1 609 92A 875 • 27.10.22 • T
en
14
Store idle power tools out of the reach of
u
children and do not allow persons unfamil-
iar with the power tool or these instruc-
tions to operate the power tool. Power
tools are dangerous in the hands of untrained
users.
Maintain power tools and accessories.
u
Check for misalignment or binding of mov-
ing parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Prop-
u
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier
to control.
Use the power tool, accessories and tool
u
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry,
u
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.
Battery tool use and care
Recharge only with the charger specified
u
by the manufacturer. A charger that is suit-
able for one type of battery pack may create a
risk of fire when used with another battery
pack.
Use power tools only with specifically des-
u
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
When battery pack is not in use, keep it
u
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
u
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is
u
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire
u
or excessive temperature. Exposure to fire
u
Service
u
u
Safety instructions for reciprocating
saws
u
u
English
u
u
u
u
u
u
u
or temperature above 130°C may cause explo-
sion.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
English
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Ser-
vice of battery packs should only be per-
formed by the manufacturer or authorized
service providers.
English
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts of
the power tool "live" and could give the oper-
ator an electric shock.
Use clamps or another practical way to se-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and may
lead to loss of control.
Keep hands away from the sawing area. Do
not reach under the workpiece. Contact
with the saw blade can lead to injuries.
Hold the power tool firmly with both hands
and make sure you have a stable footing.
The power tool can be more securely guided
with both hands.
Only bring the power tool into contact
with the workpiece when switched on. Oth-
erwise there is danger of kickback if the cut-
ting tool jams in the workpiece.
Ensure that the footplate is always resting
on the workpiece while sawing. The saw
blade can jam and lead to loss of control over
the power tool.
When the cut is completed, switch off the
power tool and then pull the saw blade out
of the cut only after it has come to a stand-
still. In this manner you can avoid kickback
and can place down the power tool securely.
Always wait until the power tool has come
to a complete stop before placing it down.
The application tool can jam and cause you to
lose control of the power tool.
Use only undamaged saw blades that are in
perfect condition. Bent or dull saw blades