GLOBBER E-MOTION 27 Manual Del Propietário página 6

SPEED MODE SELECTION
When you first press the ON/OFF button, the scooter is by default in "speed mode 3". When the scooter is in "ON" mode, but the motor is not engaged, the scooter is in "standby mode".
In standby mode, you can switch between the 3 speed modes by double-clicking the ON/OFF button.
km/h
Speed
mode S
symbol Double press to
change the speed
modes
km/h
S
km/h
S
Remember, to switch from "speed mode 3" to "speed mode 2", double-click the ON/OFF button. Then, to switch from "speed mode 2" to "speed mode 1" double-click again the ON/OFF button. Finally, to
switch back from « speed mode 1 » to « speed mode 3 » double click again the ON/OFF button.
FRONT LIGHT
Front light
4 - ASSEMBLY
UNFOLD THE SCOOTER
Step 1. Open the lever and raise the t-bar to the maximum height until the
folding mechanism is locked.
Note: Please ensure that the folding lever is open before you raise the t-bar.
Otherwise, the t-bar cannot lock in the upright position.
Step 2. Close the folding lever completely and ensure that the red button is
clipped into the square hole.
ENGLISH
6
Speed mode 3 (default mode): Max speed is 25km/h.
The LCD screen will show 3 bars on the « S » speed symbol.
Speed mode 2: Max speed is 18km/h.
The LCD screen will show 2 bars on the « S » speed symbol.
Speed mode 1 (pedestrian mode): Max speed is 6km/h.
The taillight will flash.
The LCD screen will show 1 bar on the « S » speed symbol.
- Short press the ON/OFF button to turn on the front light. The
taillight will light up.
- To turn off the front light and taillight, short press the ON/OFF
button again.