ADE WS 2322 Instrucciones De Operación página 38

Setting the time
When you power up the device, the display shows the following
information:
‚ Room temperature in °C
‚ Humidity in percentage
‚ Time (starts at 12:00 p.m.)
Proceed as follows to set the correct time:
1. Keep the MODE button pressed until the minute digits flash
on the display.
2. Press the UP button repeatedly or keep it pressed to set the
minute digits correctly.
3. Briefly press the MODE button.
4. Proceed as described:
− Press the UP button to set the desired value.
− Press the MODE button each time to save changes.
38