Operating Your Hydrive Hub Motor; Safety Rules; Product Description And Specifications - Electra IHI HYDRIVE eBike system 20 mph Manual Del Propietário

Hub motor

2. Operating your Hydrive hub motor

2.1 Safety rules

Please read all safety warnings and instructions
carefully. Failure to comply with the following
warnings may result in death or severe injuries.
Do not throw away owner's manual or remove
any safety warning labels or instructions from
any system components.
The "battery" referred to in this manual refers to
all genuine Hydrive electric system batteries.
Do not dismantle the hub motor, the hub
X
motor should only be repaired or maintained
by a certified mechanic, using genuine
parts from Hydrive. Unauthorized
dismantling of the battery pack or hub
motor will void all warranties.
X Do not change or modify any Hydrive
system components or any components
that are part of the bicycle drivetrain.
Changing components could cause damage
or overloading of the hub motor, and may
lead to serious injury or death.
X Remove the battery pack before performing
any inspections, maintenance or repairs
on the bicycle; inspecting, maintaining or
repairing the bicycle before removing the
battery pack may result in severe injury.
Unexpected activation of the e-bike system
may result in severe injuries.
X To avoid injury, do not obstruct pedals,
cranks, or wheels.
X Only use genuine Hydrive batteries and
battery packs, or battery packs approved for
use with your e-bike by the manufacturer,
and purchase only from approved vendors.
Use of uncertified battery packs may result
in death or severe injuries.
X After riding, don't touch the metal
housing of the hub motor with your bare
hands or legs. Allow the hub motor to cool
before removing or servicing.
The surface temperature of the hub motor
can increase due to the following factors:
- Temperature from surrounding environment
- Ride route
- Ride duration
- Assistance level
- User behavior
- Total weight
- Heat dissipation properties of the bike frame
and hub motor
Please follow all local, state, and federal
”
regulations regarding the use of e-bikes.

2.2 Product description and specifications

Usage
This hub motor can only be used to drive e-bikes;
do not use it for other purposes.
Software for Hydrive system troubleshooting and
software updates for the e-bike system will be
distributed through your local certified Hydrive
dealer.
Technical data hub motor
Item
Part number
Rated voltage
Torque at drive,
max.
Rated continuous
power
Operating
temperature
Storage
temperature
19
Specification
56R011
36 Vdc
40 Nm
250 W
14°F~104°F (-10°C~+40°C)
80% HR
-4°F~140°F (-20°C~+60°C)
80% HR
EN - 3