Lomography fisheye 2 Instrucciones De Uso página 6

[10]
is up to "1". When the film is loaded correctly, the Rewind Crank
will turn as you use the Advance Wheel [9]. If the Rewind Crank
turning, open up the camera and ensure that your film is properly loaded.
shoot!
Before you do anything, first remove the Lens Cap
To shoot a picture, simply turn the Advance Wheel
and press the Shutter Release
more and you're ready to shoot again. As a rule of thumb, try to get as close
to your subjects as possible. Even extreme-close-up shots work!
If the light is low or you wish to fill in shadows in the daytime, then activate
the Internal Electronic Flash
right, listen for the telltale flash-charging "whine" and wait for the Ready Light
[8] to glow. Firing the Shutter Release
Here are a few notes for effective flash use:
•
If the flash does not turn on, then confirm that your battery is properly
loaded and fresh.
•
Always wait for the Ready Light
•
The internal flash is not strong enough to cover the Fisheye's huge field of
[1] to fire it. Turn the Advance Wheel
[4] with the Flash Switch [6]. Switch it to the
[1] will shoot the internal flash as well.
[8] before firing.
[3]
[15] without turning it.
[9]
to cock the shutter
[3]
is not
[9] once
6