Publicidad
Idiomas disponibles
Idiomas disponibles
Transmitter
1.Power on and power off
Power on: Press and hold (
) button for 1 second
to power on.
Power off: Press and hold (
) for 1 second to
power off.
2.Mute function
In working mode, press (>) or (+) button, the
transmitter enters mute mode
icon appears on
the transmitter screen and
icon disappears. At the
same time,
icon appears on the receiver screen.
Press (>) or (+) button again, the transmitter will
return to normal working mode,
icon appears on
the transmitter screen and
icon disappears
from receiver screen at the same time.
3.One key shutdown function
In working mode, press and hold (>) or (-) button for about 5 seconds until the
OFF icon flashes on the transmitter screen and
icon disappears, all
receivers paired with this transmitter that are within the range will be powered off.
Then you can short press any key of the transmitter to exit the one key shutdown
mode or long press and hold the (
) key to power off.
4.Interface description
There are two jacks at the bottom of the transmitter, the MIC microphone jack on
the left and the AUX audio input jack on the right.
Note: Don't insert them into the wrong interface, if you plug the mic into the AUX
jack, there will be no sound.
5.Channel Setting
When encountering the following situations, you will need to set the channel
A.If there are two or more transmitters in use, select different channel for each to
avoid interference.
B.When you need to add receivers for a group (transmitter and receivers
channels must be the same in each group).
Channel Setting Operations
A.In working mode, press and hold (>) and (<) buttons at the same time until
the
icon disappears on the transmitter screen, t.
B.Release the (>) and (<) buttons, the transmitter will enter channel setting mode
C.Press (>), (<), (+) or (-) buttons to select the desired channel ( the value could
be set from 01 to 49).
D.Press and hold (
) button for 3 second until the channel ID flashes on the
transmitter screen and
icon disappears.
E.Release the (
) button, the transmitter enters the wireless channel
synchronization mode.
1
Publicidad
