EINHELL TE-TC 18/115 Li Manual De Instrucciones página 13

18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
This wet tile saw is designed for the standard
cutting of small and medium-size tiles (glazed
tiles, ceramic tiles or similar) which can be
accommodated by the size of the machine. It
should never be used for cutting wood or metal.
The machine should be used exclusively for
its intended purpose. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be held liable for damage
and/or injuries of any kind that result from such
misuse. The machine is to be operated only with
suitable diamond blades. Saw blades should
never be used. Compliance with the safety
instructions, the assembly instructions, and
advice and instructions on operation contained
in the operating instructions also falls under
the terms of intended use. All persons who use
and service the equipment must be acquainted
with this manual and must be informed about
the machine's potential hazards. In addition,
strict compliance with the accident prevention
regulations in force in your area, as well as all
other general rules of health and safety at work,
is imperative. The manufacturer's liability shall be
deemed void if the machine is modifi ed in any
way and the manufacturer shall therefore accept
no liability for any damages arising as a result of
modifi cations. Even when the equipment is used
as prescribed it is still impossible to eliminate
certain residual risk factors. The following hazards
may arise in connection with the machine's
construction and design:
•
Contact with the diamond blade where it is
not covered.
•
Contact with the diamond blade while it is
turning.
•
Defective diamond tips flying off the blade.
Anl_TE_TC_18_115_Li_SPK7_USA.indb 13 Anl_TE_TC_18_115_Li_SPK7_USA.indb 13
EN
•
Kick-back of workpieces and parts of
workpieces due to improper handling.
•
Damage to hearing if ear protection is not
used as necessary.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................ 18V
No load speed (RPM): ................................. 3800
Cutting height 90° .........................................
Cutting height 45° ...........................................
Cutting table dimensions ....................12" x 13
Blade size: .................................................... 4
Arbor size: ........................................................
Weight (Tool only): .....................................7.5 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
layout:
- 13 -
⁄ "
15
16
⁄ "
5
8
⁄ "
3
16
⁄ "
1
2
⁄ "
7
8
06.06.2023 09:29:19 06.06.2023 09:29:19