Jandy Infinite WaterColors R0979800 Manual Para La Instalacion página 10

Jandy
1
Figure 4. Remove PCBA
10. Remove the old PCBA from Light Controller, see Figure 4.
11. Attach the transformer blue output wires to output wire screws
on new PCBA and tighten.
12. Plug the white transformer input wire connector harness to the
new PCBA.
13. Plug lower white PCBA connector to the new PCBA.
14. Place the new PCBA into the Light Controller with the PCBA
bracket slots on the mounting screws and tighten screws.
Page 10
Infinite WaterColors
®
5
LED Light Controller | Spare Parts Installation Manual
™
2
4
3