Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Battery state of charge indicator (Fig. B)
The battery includes a state of charge indicator to quickly
determine the extent of battery life as shown in figure B. By
pressing the state of charge button (4a) you can easily view
the charge remaining in the battery as illustrated in figure B.
Installing and Removing the Battery Pack from the
tool
To install battery pack (Fig. C)
Insert battery pack firmly into tool until an audible click is
u
heard as shown in figure C. Ensure battery pack is fully
seated and fully latched into position.
To remove battery pack (Fig. D)
Depress the battery release button (4b) as shown in figure
u
D and pull battery pack out of tool.
Storage hook (Optional extra) (Fig.E)
Warning! To reduce the risk of serious personal injury, ensure
the screw (6) holding the storage hook is secure.
Note: When attaching or replacing the storage hook (7), use
only the screw (6) that is provided. Be sure to securely tighten
the screw.
If the hook is not desired at all, it can be removed from the
tool.
To move the storage hook, remove the screw (6) that holds
the storage hook (7) in place.
Note: Various trackwall hooks and storage configurations are
available.
Please visit our website www.stanley.eu/3 for further
information.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
To switch the light on press in the switch (1)
u
To switch the light off press in the switch (1)
u
The pivoting lens (fig. F, G)
For your convienience, the lens can be pivoted into
u
a range of positions.
Turn the pivoting LED wheel (3) anti clockwise and
u
position the Lens (2) as required.
18
(Original instructions)
Note: The area light has 2 brightness levels. Continue
to press the on/off switch (1) to cycle from OFF-HI-LO
brightnesses.
Maintenance
Your STANLEY tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste..
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
Lumens
Runtime
Weight
Charger
SC125
AR , B2
B3
Input
V
BR
Voltage
BIVOLT
AC
(127V | 220V)
Output
18V
V
Voltage
(20V MAX)
DC
Current
A
1.25
Battery
SB201
18V
Voltage
V
(20V MAX)
DC
Capacity Ah
1.5
Type
Li-Ion
18V (20V MAX)
on high setting = 1825
on low setting = 650
4 hours (based on battery 2Ah)
SC200
SC400
AR , B2
AR , B2
220V
220V
B3
B3
120V
120V
BR
BR
127V
18V
18V
(20V MAX)
(20V MAX)
2
4
SB202
SB204
SB206
18V
18V
(20V MAX)
(20V MAX)
(20V MAX)
2.0
4.0
Li-Ion
Li-Ion
Li-Ion
SCL030
2.4 Kg
220V
120V
127V
18V
6.0
Publicidad
