EDIFIER HECATE GT4 Manual Del Usuario página 7

■ Restore to factory settings (use with caution)
Restoring to factory settings will clear all pairing records of the earbuds
• After the earbuds are powered off, respectively press and hold the touch zones of the left and
right earbuds for 8 seconds.
• Please refer to the procedures mentioned in "TWS pairing of the left and right earbuds" to
complete TWS pairing again; please refer to the procedures mentioned in "Two Earbuds Mode"
to pair with Bluetooth devices again.
■ FAQs
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with Bluetooth device.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good
• Check if Bluetooth device is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no obstacle between the
earbuds and Bluetooth device.
When playing music, cannot control pause/play/previous track/next track via the
earbuds.
• Please ensure the paired Bluetooth device supports AVRCP (Audio/Video Remote Control
Profile) profile.