Checkmotorsafetyfilter frequentlyand
changewhen dirty.
WARNING
Electrical
Shock Hazard
Unplug
power cord from
electrical
outlet.
Do not operate
the cleaner
without
the motor safety filter.
Be
sure the filter
is dry and properly
installed
to prevent
motor failure
and/or
electrical
shock.
Remove
the dust bag as outlined
in the
DUST BAG CHANGING
section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced
when dirt;,/.
It should
be
replaced
regularly
depending
on use
conditions,,
The fil-
ter CANNOT
be
washed
as it will
lose
its dust trap-
ping
ability.
Motor
f_
Safety
._"._
"_h_
Filter
" "_."_
NOTE: See PARTS AND FEATURES
for
motor safety filter number,r
Filter
" "_'__
2. If the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs.
3. Replace
the
filter, white side
up, by sliding
it
back into place
under the ribs in
the bag cavity
Motor
Replace
the bag as outlined
in the DUST
BAG CHANGING
section.
WARNING
Do not operate
without
exhaust
filter.
EXHAUST FILTER
HEPA
The exhaust
filter cartridge
must be
replaced
when dirty.
It should
be
replaced
regularly
depending
on use con-
ditions. The filter
CANNOT
be washed
as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
the exhaust
filter number,
Slide the
exhaust fiffer
cover release
down.
Pull out
on exhaust
fil m
ter cover to
remove from
bag cover_
Exhaust
Filter
/1
I1
COvet Release._t_L_
cover_
_
Remove
the
exhaust
filter car-
tridge from the
bag cover..
Replace the exhaust filter
cartridge,
carefully posio
tioning it so that it fits into
the bag cover. The grey
edge of the filter
should
be facing
away
from the operator.
Push
only on filter cartridge
frame, not on filter itself.
Bag
Exhaust
Exhaust
Filter !_
Cover Release
Exhaust
_-_'_
Fittor
/ 1t!
Cover __
Replace
the
exhaust
filter
cover and
secure the
latch by push-
ing it upward.
15