Publicidad
Idiomas disponibles
Idiomas disponibles
Installation procedure
J_
CAUTION
Installing
the heat shield
For safety reasons, the heat shield must be properly installed. This prevents some
components from overheating, avoiding the recirculation of hot air from the
cooktop.
Transport
The heat shield is the same width as the cooktop.
For shipping, it is screwed to the burner box.
Installer
After unpacking
the cooktop,
unscrew the heat shield (see illustration).
Screw the heat shield to the base of the burner box using the pre drilled holes, as
shown in the illustration.
The cooktop is 3 1/3" (85 mm) high. Once the heat shield has been installed, the
total height of the cooktop is 5 1/3" (135 mm).
7
Publicidad
