GIA OEM3 Manual De Usuario E Instalacion página 59

Notes:
⚫ Earthing screw must use special screw(stainless machining screws or copper screws M4)
Ensure that all wires are securely connected, will not loose or separate.
⚫
⚫ Ensure that wire connections are carried out according to the wiring diagram of the air conditioner.
⚫ The above figures are only schematic, and they may be slightly different from the actual appliances you select
• Tube Strapping
Strapping with PVC Protective tape must be careful, do not damage the pipeline and drain pipe.
⚫
Strapping should start from the lower part of the outdoor unit to the indoor unit.
⚫
⚫ Fix the PVC tape with adhesive tape to prevent loosing.
Drainpipe should slightly slide down outwards to ensure drainage well.
⚫
When the indoor unit is lower than the outdoor unit, bend the tube to proper extent to prevent water draining
⚫
into house.
Fix the tube bundle with tube clamps on the wall.
⚫
Allow enough space between discharge pipe and the ground. Do not put the discharge pipe in water or ditch.
⚫
⚫ Seal the external wall holes with sealing gum or putty.
INSTALLATION MANUAL
PVC protect tape
Fig 14
25
Wall
Clamp