GreenWorks GD60LT Manual Del Operario página 9

EN
Problem Possible Cause Solution
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor
housing.
The line The cut-off blade
does not becomes dull.
cut well.
Vibration The line is worn
increases down at one side
obviously. and not exten-
ded in time.
8 TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting line diam-
eter
Cutting path di-
ameter
Weight (without
battery pack)
Measured sound
pressure level
Guaranteed
sound power lev-
el
Vibration
Battery model
Charger model
Noise value.
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage)
from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
1. Cut tall grass from
the top down.
2. Remove no more
than 20 cm in each
pass to prevent wrap-
ping.
Sharpen the cut-off
blade with a file or re-
place it.
Make sure that the line
on both sides is equal.
Extend the line.
60 V
6000 ±10% RPM
Bump feed
2.0 mm/2.4 mm
35.6 cm / 40.6 cm
3.6 kg
L =87 dB(A), K = 3 dB(A)
PA PA
L = 96 dB(A)
WA.d
2 2
7.5 m/s , k=1.5 m/s
G60B2/G60B3/G60B4 and other
BAC series
G60UC and other CAC series
English
might be either repaired or replaced. A unit that has
been misused or used in other ways then described
in the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: Globe Technologies Europe GmbH
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Name and address of the person authorised to compile
the technical file:
Name: Ralf Pankalla
Address: Brunnenweg 17, 64331 Weiterstadt,
Germany
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following (parts/
clauses of) harmonised standards have been used:
• EN 60335-1; EN 50636-2-91; EN 62233; EN
55014-1; EN 55014-2; EN ISO 3744; EN ISO
3744; ISO 11094; IEC 62321-7-2; IEC 62321-4;
IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC
62321-8; IEC 62321-3-1
Conformity assessment method to Annex VI / Directive
2000/14/EC.
8
Grass trimmer
STG404(GD60LT)
See product rating label
See product rating label