Ducati DHT 401L Manual De Instrucciones página 19

2) Personal security
a) Stay alert, focus on what you are doing and use common sense when using a tool.
Do not use a tool when you are tired or under the influence of any drug, alcohol or
medication. When working with a tool, lack of concentration can cause serious personal
injury.
b) Always wear safety equipment and eye protection (safety glasses).
Safety equipment such as a dust mask, non-slip footwear, helmet and ear protection will
reduce the risk of personal injury.
c) To avoid an unintended start. Make sure the switch is in the OFF position before
connecting the battery. Carrying the tool with your finger on the ON / OFF power
switch or having it connected to the battery with the switch in the ON position may cause
accidents.
d) Remove any regulation wrench or wrench before turning on the machine.
A wrench or any key that is in any rotating part of the tool can cause personal injury.
e) Keep your feet well seated and in balance at all times. This will allow you to better
control the tool in unexpected situations.
f) Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving elements.
Loose clothes, jewelry or long hair can get caught with moving parts.
g) If dust collection or accumulation devices are supplied, make sure they are
properly connected. The use of these devices may reduce the risk of dust related
damage.
3) Proper handling and use
a) Do not overload the tool. Use the tool for what was designed and for each type of
work. Using the right tool and within its performance range will make the job safer and
more effective.
b) Do not use the tool with a damaged switch. Any tool that cannot be turned on or off is
dangerous and must be repaired.
c) Unplug it from the main socket and / or remove the battery before adjusting the
machine, change accessory. This precaution will prevent accidental starting of the tool.
d) Keep the tool out of the reach of children. Do not allow anyone who is not
familiar with the tool or with these instructions to use it. The tools are dangerous in
inexperienced hands.
e) Perform proper maintenance of the tool. Check that the mobile components are
working properly and that there is no jam / hitch and that there is no damaged
moving part so that it could affect the proper use of the tool. Have it repaired before
using it without it. Many accidents are caused by poorly maintained tools.
f) Keep the tool sharp and clean. Take good care of your cutting tools, a sharp tool will get
less stuck and easier to guide.
g) Use tools, accessories and work tools, as indicated in this instruction manual and
as indicated for each type of tool. You must also take into account the working
conditions and the area of action. The use of an electric machine for things other than
those for which it was designed can create dangerous situations.
4) Proper handling and use of tools with batteries
a) Check that the machine is turned off before inserting the battery. Inserting the
battery with the ignition switch ON can cause accidents.
b) Use only recharge devices recommended by the manufacturer. Charging equipment
is designed for certain types of batteries; If you use another type, you run the risk of
causing a fire.
c) Use only batteries designed for your tool. The use of other batteries can lead to
damage and can cause a fire.
d) Keep the battery away from any clip, coin, key, nail, screw or any other metallic
object that can generate a bridge.A short circuit between the battery and the object in
contact can burn or start a fire.
English
Owner's manual
19