BOIFUN BABY 2S Manual Del Usuario página 11

Connect the Camera to the Monitor
Power on the camera and the monitor, and then the camera will connect to the monitor
automaticallu.
Note: lf the connection to each other is not successful the first time, press and hold the reset button
on the back of the camera and reconnect the monitor after the second beep of the camera. The
connection is distance limited, so make the distance between the camera and the monitor is no
more than 1000ft.
Disconnect the camera to the monitor:
Menu > Camera.
1. Press button on the display screen, and select
OK
2. Long press the button on the display screen to release the binding.
Reconnect the camera to the monitor:
Menu > Camera.
1. Press the botton on the display screen, and select
2. Long press the camera pairing button until you hear the prompt tone.
3. Press the OK button on the display screen to start pairing.
NOTE: If uou have problems with connection, please feel free to contact admin@boifun.net for one-
on-one customer service guidance.
5 EN