BOIFUN BABY 2S Manual Del Usuario página 14

FAQ
Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. lf not, pair the camera and the monitor
firstlu.
Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button for 3 seconds. and
follow the step instructions of the display. (To enter the pairing interface of the display, press the
Menu button on the display screen, and select
Q: What if the monitor screen is stuck and it doesn't work while pressing any buttons?
A: Press the reset button of your monitor with the pin, and then long press the power button of your
monitor to restart it.
Q: Why l can't get the notifications with my cell phone App when I connect the camera to the
monitor?
A: Please confirm that the App has been running on the phone, and the relevant reminder function
has been opened; Message notification and authority con firmation in the mobile phone system has
been opened.
Q: How can l add devices or configure my network?
A: The camera can be connected to both the monitor and the application.
Generally, it connects to the monitor by default.
Q: The sound and cry detection function does not work.
A: The sound detection interval is 1 minute, after the sound triggers the alarm, the interval is 1 minute
again to avoid freauent alarms. The cry detection function can detect most babies crying. This
function uses a sound filtering algorithm, so some crying may not trigger the "cry detection"
function;
Please follow the steps below to connect the camera to the application.
1. Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi.
2. Download the appropriate application on your phone. Register a new account to sign in or sign in
indirectly.
3. Press the reset button to reboot the camera until the red status light flashes slowly (you must
EN 8
> Camera.)