BOIFUN BABY 2S Manual Del Usuario página 13

• SD card:
> SD card.
1. Press the Menu button on the display screen, and select Then you can view the total
capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that the important data is
backed up.
NOTE:
This product does not support hot-swapping.
Please insert the SD card before power on or unplug it after po wer off.
• Upgrade:
Make sure your camera is connected to a 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgrade alarm appears. Or Press Menu button on the
display screen, and select > Device information to check whether there is a upgrade.
• Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the display screen. Please
charge the display as soon as possible.
Motion Tracking & Alarm Area
1. Motion Tracking: Open BoifunCam app, click your device, click the pinion icon in the upper right
corner, select Motion Tracking and open it.
2. Alarm Area: Open BoifunCam app, click your device, click the pinion icon in the upper right corner,
select Alarm Management>Motion Detection>Alarm Area.
Onvif Settings:
Open BoifunCam app, click your device, click the pinion icon in the upper right corner, select Onvif
Setting, you need to set password to enable this function.
If you need to learn more about the functions of the baby monitor (Add Device, Play Music, Feeding
Reminder, Humiture Detection, Safety Protection, etc.), please scan the OR code of the electronic
manual on this quide to view the details.
7 EN