TECHNICAL SPECIFICATIONS
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20V
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Ah/4Ah/6Ah Li-ion (not included)
Motor power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720W brushless
Bar length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254mm (10")
Cutting length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22cm
Chain speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8m/s
Chain pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5mm (3/8")
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93dB(A)
Dimensions (without bar and chain) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350*225*245mm
Dimensions (with bar and chain) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600*225*245mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2kg
PARTS LIST
TROUBLESHOOTING
PROBLEM
Bar and chain running hot
and smoking.
Motor runs, but chain is not
rotating.
Motor runs, chain rotates
but does not cut.
Motor does not run.
POSSIBLE CAUSE
Check chain tension for over tightened
condition.
Chain oil tank empty.
Chain tension too tight.
Check guide bar and chain assembly.
Check guide bar and chain for damage.
Dull chain.
Chain on backwards.
Battery is not installed.
Battery problem (under voltage)
The drive system does not work correctly.
· 12 ·
NUM.
DESCRIPTION
1
Saw chain
2
Guide bar
Chain brake/Front Hand
3
Guard
4
Front handle
5
Lock-of button
6
Trigger switch
7
Rear handle
8
Battery
9
Battery release button
10
Oil reservoir cap
11
Saw chain tensioner knob
12
Guide bar tensioner knob
13
Scabbard
14
Charger
15
Quick view oil indicator
SOLUTION
Tension the chain.
Retention chain.
Refer to Replacing the Bar and Chain
earlier in this manual.
Inspect guide bar and chain for damage.
Sharpen chain.
Reverse direction of chain.
Install the battery.
Recharge the battery. If not effective,
replace battery.
Ask your local authorized service center
for repair.
REF. 60029