Num'axes PIE1067 Manual De Instrucciones página 36

Parameters
Camera mode
Photo resolution
Remote control
Multi-shot
PIR sensor detection
sensitivity
Photo | Video | Photo + Video
‒ Photo: the camera will only shoot photos.
‒ Video: the camera will only shoot videos.
‒ Photo + Video: upon the same trigger event, the
camera will shoot photo(s) first then a video.
12 MP | 8 MP | 5 MP
Higher resolution produces better quality photos
but creates larger files that take up more of the
memory card capacity (fills up faster).
Real time | Delay 0.5H | Delay 1H | Delay 2H |
Delay 3H | Delay 4H | Delay 6H | Delay 12H |
Delay 24H
‒ Real time (this option will consume huge
battery power): the camera 4G module is in
stand-by all the time; so, the camera setups can
be changed and saved whenever you send the
remote setup commands.
‒ Delay (option suggested for AA battery power):
the camera will only be able to change and save
the setups remotely every day with a delay of ½
hour, 1 jour, 2 hours, 3 hours, 4 hours, 6 hours,
12 hours or 24 hours depending on the selected
setting. The longer the delay, the lower the
energy consumption.
1P | 2P | 3P
Programmable from 1 up to 3 photos per trigger
High | Medium | Low
With the PIR sensitivity set to High, the PIR sensor:
‒ is more sensitive to movements by smaller
subjects;
‒ offers longer detection distance;
‒ can more easily detect a difference between
body heat and outdoor temperature;
‒ can more easily trigger the camera.
Guide PIE1067 – Février 2024 – ind. A - 36/128
Available settings
(default setting in bold characters)