Publicidad
Idiomas disponibles
Idiomas disponibles
Do not expose a battery pack or tool to fire or excess-
u
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
Follow all charging instructions and do not charge the
u
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of bat-
u
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety instructions for fine spray systems
Keep your work area clean, well lit and free of paint or
u
solvent containers, cloths and other flammable mater-
ials. There is a risk of spontaneous combustion. Ensure
that you have access to functioning fire extinguishers or
extinguishing equipment at all times.
Ensure that the spray area is well ventilated and that
u
there is sufficient fresh air circulating in the whole
area. Evaporating flammable solvents create an explosive
environment.
Do not spray or clean with materials with a flash point
u
lower than 55 °C. Use water-based materials, non-
volatile hydrocarbons or similar materials. Volatile
evaporating solvents create an explosive environment.
Do not spray near ignition sources such as static elec-
u
tricity sparks, naked flames, pilot lights, hot objects,
engines, cigarettes and sparks created by plugging in
and unplugging electric cables or operating switches.
These kinds of spark sources can lead to combustion of
the surrounding environment.
Do not spray materials if it is not clear whether they
u
might be dangerous. Unknown materials could create
hazardous conditions.
Do not spray boiling water. Spray only warm water
u
(max. 55 °C) which is free from chemical additives.
Wear additional personal protection equipment such
u
as appropriate protective gloves and a protective
mask or respirator when spraying or handling chemic-
als. Wearing personal protection equipment appropriate
to the conditions reduces your exposure to hazardous
substances.
Take note of possible risks posed by the spray mater-
u
ial. Observe the markings on the container or the man-
ufacturer's information regarding the spray material,
including the instructions about using personal pro-
tective equipment. You must comply with the manufac-
Bosch Power Tools
turer's instructions in order to reduce the risk of fire and
of injury caused by poison, carcinogens, etc.
Keep the battery contacts and the spray system trig-
u
ger switch free from paint and other liquids. Failure to
comply could cause electric shock.
Supervise children. This will ensure that children do not
u
play with the fine spray system.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for spraying the following spray
materials: Solvent-based and water-dilutable (recommen-
ded) lacquers, varnishes, primers, clear lacquers, impregna-
tions, oils and water.
The power tool is not suitable for use with emulsion and latex
paints (wall paints), caustic solutions, wood stains, acidic
coating materials, disinfectants, pesticides and house
paints.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Spray gun
(2)
Air cap
(3)
Cap nut
(4)
Hose port (spray gun)
(5)
Thumbwheel for spray material volume
English | 19
1 609 92A 848 | (11.07.2022)
Publicidad
