Publicidad
Idiomas disponibles
Idiomas disponibles
20 | English
(6)
Trigger switch
(7)
Container for spray material
(8)
Spare container for spray material
(9)
Nozzle cap
(10) O-ring
(11) Gasket
(12) Suction tube
(13) Nozzle needle
(14) Container seal
(15) Ventilation hole
(16) Paint channel
(17) Air hose
(18) Bayonet lock
(19) Base unit
(20) On/off switch
(21) Carrying handle
(22) Battery charge indicator
(23) Air filter cover
(24) Rechargeable battery
(25) Hose port (base unit)
(26) Carrying strap
(27) Eyelet for carrying strap
(28) Air filter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Fine-spray system
Article number
Rated voltage
Spraying capacity
Required time for application of
2
paint on 2 m
Container capacity for spray
material
Nozzle cap (9) (grey)
– "Wood" application:
Spraying solvent-based and
water-dilutable lacquers,
varnishes, primers, clear lac-
quers and oils
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– During charging
1 609 92A 848 | (11.07.2022)
Fine-spray system
– During operation
ing storage
a)
Recommended rechargeable
batteries
Recommended battery char-
gers
A) Limited performance at temperatures < 10 °C
B) The following chargers are not compatible with the PBA re-
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-1.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
determined according to EN 62841-1:
a
< 2.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
EasySpray 18V-100
increase the vibration and noise emissions over the total
working period.
3 603 B08 0..
To estimate vibration and noise emissions accurately, the
V=
18
times when the tool is switched off or when it is running but
ml/min
100
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
min
2
over the total working period.
Implement additional safety measures to protect the oper-
ml
800
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
●
and organising workflows correctly.
Rechargeable battery
Charging the battery
Use only the chargers listed in the technical data. Only
u
m
1.25
these chargers are matched to the lithium-ion battery of
kg
2.1
your power tool.
(1.5 Ah) to 2.5
Note: Lithium-ion rechargeable batteries are supplied par-
(6.0 Ah)
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
°C
0 to +35
charge the rechargeable battery before using your tool for
the first time.
A)
and dur-
B)
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
EasySpray 18V-100
°C
–20 to +50
PBA 18V...W-.
AL 18...
Bosch Power Tools
Publicidad
