SOLAX Triple Power BMS Parallel Box-II G2 Manual De Instalación página 6

• Ensure that the installation location meets the following conditions:
1. The building is designed to withstand earthquakes.
2. The location is far from the sea to avoid salt water and humidity, over 0.62
miles/997.79 meters.
3. There are no flammable or explosive materials, at a minimum of 3 ft//0.91 m.
4. The ambience is shady and cool, away from heat and direct sunlight.
5. The temperature and humidity remains at a constant level.
6. There is minimal dust and dirt in area.
7. There are no corrosive gases present, including ammonia and acid vapor.
8. Where charging and discharging, the ambient temperature ranges from 32°F/
0°C to 131°F/55°C. For Triple power 3.0: -22°F/-30°C to 131°F/55°C (with
heating function); 14°F/-10°C to 131°F/55°C (no heating function). For Triple
power 5.8: 32°F/ 0°C to 131°F/55°C (no heating function).
In practice, the requirements of battery installation may be different due to
enviroment and locations. In that case, follow up the exact requirements of the local
laws and standards.
• The company's battery module is rated at IP65 and thus can be installed outdoors as
well as indoors. However, if installed outdoors, the battery pack shall not be exposed
to direct sunlight and moisture.
• If the ambient temperature exceeds the operating range, the battery pack will stop
running to protect itself. The optimal temperature range for operation is 59°F/15°C
to 86°F/30°C. Frequent exposure to harsh temperatures may deteriorate its
performance and lifetime.
• For the first installation, the interval among manufacture dates of battery modules
shall not exceed 3 months.
• All the product labels and nameplate on the device shall be maintained clearly visible.
• See Warranty for instructions on obtaining service. Attempting to service the device
yourself may result in a risk of electric shock or fire and will void your warranty.
NOTICE!
3