Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE AUTO ON TIME
When you turn the function knob to PROG,
the previously selected AUTO ON time or the
default time (12:00) will flash.
1. Turn the function knob to PROG
Use the HR and MIN buttons as above to
program your start-brew time.
2. Turn the function knob to AUTO ON
Press the BREW/OFF button to activate
the program. When you press BREW/
OFF, the AUTO ON light will illuminate,
indicating the AUTO ON function has
been activated. LCD will display the
current time.
3. AUTO ON brew cycle begins
The CARAFE button indicator light will
come on, and the BREW/OFF button
indicator light will flash slowly when the
brew cycle begins at the time you have
selected. When the brew cycle ends,
CARAFE and BREW/OFF button indicator
lights will turn off, and five beeps sound if
TONE is on, indicating the coffeemaker is
ready for the next brew.
NOTE: To start brew time at the same
time the next day, simply make sure the
function knob is at AUTO ON, and press
and release BREW/OFF once more.
The AUTO ON light will turn on.
TURNING OFF THE READY
TONE ALERT
Press the TONE button to turn OFF the audible
alert when brew cycle is complete. To turn the
TONE alert back on, simply press the TONE
button again.
BREWING COFFEE
Follow instructions in Setting Up Your
10-Cup Coffeemaker on page 9.
1. Insert the charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 9.
2. Fill the water reservoir
Open the coffeemaker reservoir cover by
lifting it up. Pour in the desired amount of
water, using the water level indicator
located at the side of the coffeemaker.
3. Before brewing
Make sure the thermal carafe is in position on
the resting plate and the top cover is closed.
Plug the cord into an electrical outlet.
4. Set preferences
a. Push the BOLD button if you would like
a stronger brew. BOLD button indicator
light will illuminate.
NOTE: This feature can only be activated
when brewing hot coffee in CARAFE mode.
b. Activate OVER ICE function to prepare iced
coffee. See page 11 for detailed instructions.
NOTE: BOLD will be disabled when in
OVER ICE mode.
5. Add ground coffee
Remove the filter basket by grasping the
handle and lifting straight up. Insert a #4
paper filter or permanent filter. Be sure
that a paper filter is completely open and
fully inserted in the basket. It may help to
fold and flatten the seams of a paper filter
beforehand. Add 1 level scoop of ground
coffee per cup. Adjust the amount
according to taste.
NOTE: The maximum capacity for
ground coffee is 15 tablespoons for
this coffeemaker. Exceeding this
amount may cause overflow if the
coffee is too finely ground.
Replace the filter basket in the filter basket
holder, and press firmly on the cover to be
sure it closes securely.
Note: When brewing iced coffee, add ice
cubes directly into the carafe prior to
brewing. Follow the recommended recipe
below and adjust according to taste.
Brewed Coffee 10 Cups
Water 6 Cups (30 oz.)
Coffee 10 scoops (60 g)
6. Brewing coffee
Turn the function knob to BREW, and
press the CARAFE button and BREW/OFF
button; the CARAFE button indicator light
will go on and the BREW/OFF button
indicator light will flash slowly. Or set
the AUTO ON function (above left) and the
AUTO ON indicator will light.
7. After brewing
When the brewing cycle has been
completed, coffee will continue to stream
from the filter for several seconds.
When streaming completely stops, five
beeps will sound, and you can now enjoy
your coffee.
10
Ice 25 cubes
Publicidad
