Publicidad
Idiomas disponibles
Idiomas disponibles
Oven (Lower Oven)
Removing the gliding rack
NOTE
You can install the Gliding rack in any rack positions except the lowest rack
position in the oven (level 1).
64 English
NQ70M9770D_AA_DE68-04503A-02_EN+MES+CFR.indb 64
•
With the Gliding rack in the Closed
position and the oven off and cool,
grasp the rack and frame and pull both
forward to remove.
CAUTION
Do not install the Gliding rack directly above
the Wire rack.
You will not be able to install it properly
and the rack could fall.
Using the divider
•
To use twin mode operation, insert the divider into the Lower oven.
•
Handle the divider with both hands.
•
Use oven gloves when inserting or removing the divider.
To install the divider into the lower oven cavity
1.
2.
CAUTION
If the oven displays -dC-.
•
Check the divider to see if it is installed correctly.
Insert the divider into the 4th rack
position of the cavity.
Push the divider in until its back end
rests against the back of the cavity.
2018-10-05
4:17:19
Publicidad
