Huion Kamvas Pro 19 Manual De Usuario página 4

Red light on: Sleep status

Light off: Not connected to power/pen display is not turned on

Slide Switch
3
Slide the switch left or right to disable or enable the finger touch function.
Full-functioned Type-C Port x 2 (Power Supply/Signal & Data Transmission)
4
Support reverse insertion. To connect monitors, video equipment, or other devices. Provide reverse
charging up to 40W for the connected computer/phone/tablet.
3.5mm Headphone Jack
5
To connect a 3.5mm connector.
Built-in Stand
6
Two built-in stands adjustable between 0° to 20° provide the right viewing height and stable
support.
VESA Mounting Hole
7
With the 75 mm × 75 mm VESA hole pattern, you can mount the Kamvas Pro 19 pen display on a
variety of specification-compliant VESA brackets (available at
or arms for flexible adjustment of the angle and position of the pen display.
Note: As the Kamvas Pro 19 pen display weighs approximately 2kg, you should make sure that the bracket or arm
you purchase separately can support the weight, otherwise safety hazards may occur during installation.
4
HUION Store) or on other brackets
www.huion.com
GT1902