Check Prior To Operation - GENERGY CUBE Serie Instrucciones De Uso

ENGINE SWITCH
BREAKER
GUARDIAN SC6
AC 230V IMPUT
SIGNAL CONTACTS FOR START
OUTPUT AC230V 32AH
DISPLAY
SIGNAL MODE SELECTOR
4 Checks prior to operation:
4.1 Battery connection (only electrical models with electrical startup).
Before charging the electrolyte and
BATTERY TERMINALS
connecting the battery, check that the
engine switch is in the "OFF" or "0"
position.
If you have any questions on
identifying the engine switch, check
chapter
Loosen the support fastening bolts for
the battery, extract and connect the
the negative terminal. Normally
positive terminal is supplied connect
from factory.
FASTENING BOLTS
NOTE: Observe the polarity of the cables, connect the red (+) cable to the red (+)
terminal of the battery and the black (-) lead to the negative (-) of the battery.
NOTE: Be careful not to make any undesired contacts with the battery
terminals and cables, between them or against a metal part of the machine.
52